Lutron HomeWorks QS In-line Switch

Features:

• Reverse-phase dimmer capable of controlling up to 250 W of incandescent/halogen/ELV loads and up to 1 A/150 W of LED loads
• Switch rated for 6 AX of general-purpose lighting load and 2 A/0.5 HP of motor load
• Compatible with HomeWorks hybrid repeaters for remote control and programming
• Supports control via lighting scenes, scheduled events, and the Lutron Connect app
• Small size for easy retrofit installation
• Remote device association for adding controls without physical access

Specifications:

• Power: 220 – 240 V~ 50/60 Hz
• Typical Power Consumption: Dimmer/Switch: <0.5 W
• Regulatory Approvals: CE (HQRK model only)
• Operating Environment: 0°C to 40°C (32°F to 104°F), 0% to 90% humidity, non-condensing, indoor use only

Communication:

• Communicates with the system through Radio Frequency (RF)
• Must be located within 9 m (30 ft) of a hybrid repeater
• System devices operate on 868 MHz frequencies

Protection and Memory

• ESD Protection: Tested to withstand electrostatic discharge per IEC 61000-4-2
• Surge Protection: Tested per IEEE C62.41-1991 standards
• Power Failure Memory: Returns to previous state after power restoration

Mounting and Installation:

• Ensure adequate space for convective cooling, removing any obstructions within 120 mm (4.75 in) of the load control
• Avoid enclosing the load control in metal surroundings
• Accepts wire gauges between 0.5 mm² to 2.5 mm² (20 AWG to 14 AWG)

Device Limits

• Supports up to 100 devices per RF link with repeater
• Processor counts as one device and four locations are reserved for hybrid repeaters
• Load controls have specific load type and capacity limits