Skip to content
Lutron HomeWorks Switching Power Module

Lutron HomeWorks Switching Power Module

by Lutron
SKU LQSE-4S10-D
€530.00 - €530.00 excl. VAT
€651.90 - €651.90 incl. IE VAT
€530.00 excl. VAT
€651.90 incl. IE VAT
€530.00 - €530.00 excl. VAT
€651.90 - €651.90 incl. IE VAT
€ via quote
Availability: With lead time Lead times are estimates and will be confirmed with the supplier upon ordering. Our sales team will provide you with the actual lead time as soon as it is received.

Don't worry - the price isn't a secret, we're just required* to share it with you directly. Click 'Request a quote' and we'll get right back to you.

*This may be because products require customisation or professional installation services (which we provide), or are restricted from online sale.

The Lutron HomeWorks LQSE-4 Switching / 0-10 V Fixture Controller Power Module provides advanced lighting control for home and commercial environments. This versatile power module integrates seamlessly with HomeWorks QS systems, offering reliable switching and 0-10 V dimming capabilities for a wide range of lighting loads.

Features:

  • Seamless integration with HomeWorks QS systems via QS link
  • Available in models for switching only (LQSE-4S10-D) and 0-10 V switching (LQSE-4T10-D)
  • Modular design for flexible control of lighting loads
  • Supports resistive, capacitive, and inductive loads as defined by IEC/EN 60669-2-1
  • Latching relays to maintain relay state during power loss
  • Lightning strike protection up to 6000 V and 3000 A
  • Manual override contact closure input for local control
  • LED indicators for status and diagnostics

Specifications:

  • Power: 230 V~ 50/60 Hz, 50 mA maximum current draw
  • Standby power: 1 W
  • BTUs/hour when fully loaded: 4
  • Each zone rated at 10 AX for switching
  • 0-10 V rated for 50 mA maximum output per zone
  • Standards: IEC/EN 60669-2-1, EN50428, CE, C-Tick
  • Environment: 0°C to 40°C operating range, less than 90% non-condensing humidity, indoor use only
  • Terminals: Mains wiring 0.5 mm² to 6.0 mm², 0-10 V wiring 0.5 mm² to 2.5 mm², CCI wiring 0.5 mm² to 6.0 mm², Zone wiring 0.5 mm² to 6.0 mm²
  • Width: 9 modules (161.7 mm)

Mounting and Installation:

  • Use an IP20 (minimum) rated consumer panel or breaker panel with integrated DIN rail
  • Ensure proper separation of mains and low-voltage wiring per local and national codes
  • Follow Lutron's guidelines for wiring from distribution to power module unit
  • Ensure ambient temperature inside mounting panel is between 0°C and 40°C

Programming and Compatibility:

  • Compatible with HomeWorks QS software version 3.0 or higher
  • Setup and programming via HomeWorks QS programming software
  • HomeWorks QS wallstations can control power modules through the programming utility
  • LED indicator displays the status of programmed lights

Manual Mode Operation

  • Zone buttons select the zone to control
  • Raise/Lower buttons turn loads on and off, and dim loads up and down (LQSE-4T10-D only)

Wiring:

  • IEC PELV / NEC Class 2 separation for contact closure input and QS Link
  • Total length of QS link must not exceed 600 m
  • Use specified wire gauges and follow national and local codes for proper separation and protection